Continuous white plastic coated steel boning in 6 widths available on 10m,25m and 50m rolls. Also known as Crinoline or hoop steel.
All of our steel boning can be cut to length using aviation snips or similar and the ends rounded before using in corsets. The exception being the 15mm x 1.4mm steel, this cannot be cut using snips, the best method is a vice and hacksaw with metal blade (please wear eye protection).
It is also commonly used for crinolines, bustles, panniers etc
Metal hoop joints are available too.
To join the ends when making petticoats try our plastic end caps. OR...Why not try our wide transparent heat shrink Pop a length of heat shrink over your hoop, overlap the ends and hold in place with masking tape. Bring heat shrink over join and heat gently until it encloses the steel.
Made in Europe
BONE SIZES (approximate)
5.5mm wide x 0.95mm thick
7.5mm wide x 1.06mm thick
10mm wide x 0.60mm thick
13mm wide x 0.73mm thick
15mm wide x 0.93mm thick
15mm wide x 1.4mm thick (See separate listing)
Our Price (inc VAT):
End Caps for finishing your own spiral wires
Our Price From: £3.71
Ideal for finishing the ends of laces and bones.
Our Price From: £1.00
Our Price From: £2.82
Our Price From: £3.97
Spiral Wire on rolls, just add end to make your own custom sized wires.
Our Price From: £3.30
Classic 2 part steel corset busk with silver clasps
Our Price From: £7.25
The easiest way to add boning channels to corsets, crinolines, bustles etc
Our Price From: £5.75
Small metal joints for making hoops from steel boning.
Our Price From: £0.25
Classic coutil, ideal as a tough lining to fashion fabrics.
Our Price From: £10.62
Please fill in the following form to contact us.