Beautiful coloured two part busks for corsetry. The perfect match for many of our gorgeous fabrics.
Coated for us by the lovely Nikki at Narrowed Visions.
A heavy weight solid stainles steel busk. This busk has limited flex in it and is well suited to making straight fronted traditional corsets.
A steel busk with plastic dipped ends.
Available in lengths from 20cm to 43cm.
Each half is approximately 22mm wide. Top European quality.
POWDER COATING FAQ
Q: Will the coating chip?
A: There is currently no way to coat metal (especially stainless steel) that will not chip or wear under the right circumstances. However powder coating is extremely hardwearing and will resist chipping if it is handled correctly.
Q: What are these marks and will they affect the coating?
A: Some marks are caused by the wire used to hang the busk. Sometimes, either due to the busk being slightly off centre or a slight relaxation of the hook during curing, the powder on the busk comes into contact with the powder on the hooks. When the busk is cured (heated in the oven) the powder flows over both and so the hook must be separated from the busk manually. This mark will not affect the performance of the powder coating and will not be visible when the busk is in use. If you are concerned about any rough edges then a nail file can be used to smooth out the mark.
Q: Why are there holes in the ends of the busk
A: These holes allow the busk to be hung during the coating and curing process. They also keep any marks (that can be caused by the hanging wire) on the part of the busk that will not be seen during its normal use.
Our Price (inc VAT):
Classic two part busk with gold plated clasps.
Our Price From: £7.24
NEW! Gold Plated Suspender Fittings in Two widths.
Black grips with gold plated metal fittings and elegant gold regulators and NOW matching suspend...
Our Price From: £4.10
Two way flexible wire bones for corsets.
Our Price From: £0.29
Essential Bra fittings in silver and gold plate.
Our Price From: £0.16
Spoon Busks, essential for 1870s to early 1900s corsetry.
Our Price From: £15.54
Hand tool for professionally setting our lace tips.
Our Price: £64.00
Simple metal tips to finish laces.
Our Price From: £2.50
Fly press and custom dies for Prym eyelet setting or spiral wire end cap fitting
Our Price From: £44.00
Pretty item to finish your corset lace ends.
Our Price From: £1.00
Couture fabric for foundation garments
Our Price From: £15.41
Please fill in the following form to contact us.